Change Of Course: Reviewing The UK Perfect Fake IWC Pilot’s Watches Timezoner Chronograph

Top replica IWC’s Timezoner watches was developed to be an ideal travel companion. A quick spin of the bezel suffices to show a new time zone, and a built-in flyback chronograph makes this an exceptional timepiece at a reasonable price.

Flying through time zones with the AAA online fake IWC Pilot’s Watches Timezoner Chronograph is a reliable undertaking, not only because IWC’s expertise with pilots’ watches dates back to 1936. Once the time change has been programmed, it always works perfectly.

The programming sequence relies on an unusual arrangement between the case and the movement. To correctly set this world-time high quality IWC replica watches, you begin by pressing the rotatable bezel downward against the stainless-steel case, which is nearly 46 mm in diameter. Then you turn the depressed bezel until the reference location for your home time zone appears at 12 o’clock, directly above the little triangle on the flange. If daylight savings time is currently in effect, you must rotate the bezel one position farther until the city’s accompanying dot with the letter “S” (as in “summer”) is in the 12 o’clock position. When positioning the bezel, you must press the rotating ring down firmly at two opposite points and make sure that it clicks securely into the desired setting. This isn’t hard because the ring snaps into place with a click that you can both hear and feel. The click indicates that the adjusting process is complete. Now the rotatable ring can’t be repositioned by mistake.

The Bezel Does What the Crown Used to Do

The next actor in the resetting drama is the crown, which must first be unlocked by turning it to the left. When you pull the crown out to its extracted position, the movement lets you reset the best IWC copy watches’ hands. What’s unusual is that the screw-down crown offers no middle position to quickly reset the date because this role is played by the rotatable bezel. This is an especially convenient feature at the end of a month with only 30 days. If you turn the bezel clockwise in hourly increments, the date switches each time the hour hand and an additional 24-hour hand pass through the midnight position. You now continue turning the bezel, which propels the hands so they point to the correct hour in your local time zone. The only detail to bear in mind here is that the 24-hour hand must also indicate the correct local time. Its red arrowhead shows the appropriate hour on the smaller 24-hour circle closer to the dial’s center.

And you’re done! From now on, all you do is turn the bezel whenever you want to reset your Swiss movements replica IWC watches in hourly increments to show the time in a new zone. If you travel east, you turn the bezel clockwise. That’s logical, because the hour is later toward the east, where the sun has already been. If your journey takes you west, you turn the rotatable ring counterclockwise, because you are traveling “backward” in time, to an earlier hour. The date display always switches along with the hour hand, both forward and backward.

If you’re staying at an exotic location and want to know what time it is at home, or if you’re at home and you want to know what time it is elsewhere in the world, simply exert pressure evenly downward against the bezel and turn it until the desired location swings into the 12 o’clock position: a fascinating pastime.

In 2014, cheap IWC super clone watches acquired the patents for this convenience from Vogard, a company that was founded in 2002, thus giving IWC an innovation that had been launched 10 years earlier. This type of world-time complication had never been seen in a wristwatch until that time. The owner of a Vogard watch could set it to show the world’s time zones simply by turning the bezel, which advanced the corresponding hand in hourly increments. Commenting on the sale of his company, Vogard owner Michael Vogt explained that as a watch studio and niche supplier, he did not have the financial and structural means to develop this innovative technology to its fullest potential.

Technology Transfer for Timezoner Mechanisms

IWC has developed Vogt’s innovation further. For example, the edge of the luxury IWC replica watches’ case no longer hosts a gigantic lever, which must be opened before the Timezoner function can be activated. Instead, the function is almost wholly concealed behind the left side of the case, where close scrutiny shows two narrow grooves toward the lugs.

IWC’s engineers combined three technologies for the Timezoner mechanism. First, there’s the city ring from the 2023 fake IWC Pilot’s Watches Worldtimer: each city’s name represents one of the international time zones. Second, there’s the spring-loaded rotating bezel: first used on Porsche Design’s Ocean 2000 in the 1980s, this ring can only be rotated if pressure is applied simultaneously to two opposite points. Third, there’s the Aquatimer’s system of outer and inner rotating rings: this system transmits the movement of the outer bezel via a differential gear train to the hour wheel, the 24-hour hand and the date wheel. In addition, IWC combines the Timezoner function and its manufacture chronograph Caliber 89760. This combination doesn’t rely on a classic modular solution because the engagement with the movement comes from the bezel.

Integration into a chronograph mechanism already existed at Vogard in 2008, followed three years later by the patented date display and date switching. This is no longer connected to the originally set time but is synchronized with the displayed time zone. It conveniently switches forward or backward whenever the hour hand and 24-hour hand pass midnight. Independent watchmaker Andreas Strehler was involved with both developments. The original design was devised and constructed in collaboration with watchmaker Thomas Prescher.

This system is amazingly simple compared to other world-time China IWC replica watches. The locking motion of the bezel is transmitted via the movement to the hour wheel and hour hands, as well as to the 24-hour hand and the date wheel, so all three displays can be reset forward or backward. A differential gear train powers both the single-hour jumps during time zone resetting and the continuous progress of the hour hand. The movement, with its continually advancing minutes hand and seconds hand, as well as the chronograph, all remain unaffected during resetting, so the watch still shows the correct time even after lengthy experimentation with the world-time display or, as in our test, indulging in a bit of playful toying.

Regarding timekeeping, IWC’s self-winding manufacture Caliber 89760 runs with reliably well-balanced rate performance inside this world-time watch. The construction lets you keep the chronograph in continuous operation, while the wholesale IWC fake watches’ rate remains stable with an average gain of 2.9 seconds per day. A noteworthy and convenient feature is that the elapsed minutes and hours share a common subdial at 12 o’clock, where the elapsed time can be read intuitively, as on an ordinary dial.

A Rare Combination

Since the chronograph can be allowed to run uninterrupted, with a bit of planning you can use this display to show a second time. Furthermore, the chronograph is equipped with a flyback function that lets you start a new elapsed-time measurement directly from an ongoing one.

The movement boasts IWC’s characteristic features: sturdy construction, ratchet winding and a long power reserve of 68 hours. It’s a member of the 89000 caliber family, which was launched in 2007 with the 89360, the first chronograph movement developed entirely in Schaffhausen. The 89365 version also includes a flyback function. Further development to Caliber 89800 integrates a large digital display for the date and the month. Additional complications are found in Caliber 89630 (with perpetual calendar) and Caliber 89900 (with tourbillon). On the other hand, the 89760 movement that’s in our test watch is a practical version that’s well-suited for everyday use. The combination of world time and a chronograph is rarely found on the market. This rarity means that the Swiss made replica IWC Pilot’s Watches Timezoner Chronograph is relatively appealing at a price of $11,900, although not a bargain.

The typical styling of IWC Pilot’s fake watches for men unfolds beneath a sapphire crystal that has anti-reflective coating on both sides and is secured against a sudden loss of pressure. The pilots’-watch design features clearly legible numerals and hands, readability of the time at night, and bold contrast between black and white elements. This color scheme is matched by the date display. Relying on white numerals atop a black disk, this indicator gradually changes to show the next date each night at midnight. A clearly calibrated scale on the steep flange along the dial’s periphery does double duty for the minutes and the elapsed seconds. The 24-hour display is less visible on an anthracite-colored ring inside the hour circle.

With this distinctive outfit, the buy replica IWC Pilot’s Watches Timezoner Chronograph clearly succeeds as a classical pilots’ watch. The decisive elements of a pilots’ watch are kept in the foreground, while the additional functions and their corresponding scales convey an instrumental impression and a touch of aviator-style elegance.

UK Top 5 IWC Ingenieur References Replica Watches Online

In this series, we take one classic watch and choose our five favorite references ever produced. Four of these references will be based on the historical importance of the specific watch in the grand scheme of things. Though there may be some overlap, it’s not a question of which references are the most collectible or of the highest value on the market. The fifth pick is our favorite that considers the current market price and collectability, potentially making it a sleeper reference. As such, the last pick could be described as our wild card. This week, we’ll look at the AAA UK IWC Ingenieur replica watches’ history. What came before Genta’s Ingenieur, and what came after? These are our five favorite IWC Ingenieurs.

IWC’s main attraction for 2023 is the return of the Ingenieur modeled after the Gérald Genta-designed Ingenieur SL “Jumbo” ref. 1832. That watch was introduced in 1976 and is part of Genta’s famous Royal Oak, Nautilus, and Ingenieur trilogy. For many fans, this year marks the long-awaited revival of a classic, a watch that should have always been part of the IWC collection. But the history of the Ingenieur goes back a lot further than Genta’s version of high quality fake IWC’s engineer watches. The legacy started back in 1954 when the Schaffhausen brand introduced the first Ingenieur.

The concept of an engineer’s watch

IWC’s Ingenieur was simple in its concept but groundbreaking in its execution. The engineer’s watch was developed by Albert Pellaton for scientific, technical, and exploration purposes. The main features necessary were precision timekeeping, antimagnetic properties, and substantial water resistance. While such a watch was perfect for scientists, engineers, and explorers, essentially, it could be a great daily watch that anyone could wear without having to worry that it would break. It started a great legacy of well-designed perfect IWC replica watches that have become much-loved among watch collectors. But which are the five best references ever produced? In all honesty, it’s hard to pick just five. IWC produced such an abundance of great models that they could easily lead to a list of ten. But as we only have five spots, we went for our absolute favorites. Let’s check them out.

Replica IWC Ingenieur ref. 666A/AD Watches

As usual, we’ll start our list with the very first reference, the IWC Ingenieur 666. The famous Albert Pellaton, who developed the Pellaton Winding System, started working on the first Ingenieur in the early 1950s to create an everyday watch for engineers. As such, it needed to be a perfect daily wearer with a set of specs that could handle the challenges that engineers faced. It resulted in the first Ingenieur ref. 666, which debuted in 1955. The best IWC copy watches featured a 36.5mm case that was 13.2mm thick. It was based on the case that IWC used for its famous Mark XI. The substantial thickness was mainly caused by the Faraday cage inside the case. This soft iron cage protected the movement against magnetic fields up to 80,000 amperes per meter. On top of that, the watch was water resistant to 100 meters.

The first model had two different references. The first was the no-date ref. 666A, and the other was the ref. 666AD with a date. The dateless version came with IWC caliber 852, and the version with a date was powered by caliber 8521. Both these movements operated at 19,800vph, had a 42-hour power reserve, and featured the Pellaton winding system. The Swiss made replica IWC watches came with either a black or white silvered dial and a set of luminescent dauphine hands. Several dials from the first series (1955–1959) featured numerals at 12 and 6 o’clock. But there were versions without the numerals too, as well as ones with numerals at 3, 6, 9, and 12 o’clock. The steel models came with either a leather strap or a steel bracelet. The 18K gold version on a leather strap looks super classy.

An improved version of the ref. 666

The next iteration of the ref. 666 was introduced in 1959 and used an updated movement. The new versions had the same case as the first version, but inside, IWC equipped them with the updated caliber 853 for the no-date version and caliber 8531 for the version with a date. This version of the Ingenieur stayed in production until 1967 when it was replaced by the new cheap fake IWC Ingenieur ref. 866 watches. In those eight years, IWC produced different variations of the ref. 666 with a black or silver dial. As was usual in that era, there were quite a few different executions of the dials, so you’ll see versions with pie-pan dials as well as ones with different markers. What is always present, however, is the great style of this classic IWC Ingenieur.

Fake IWC Ingenieur ref. 866A/AD Watches

In 1967, IWC introduced the new Ingenieur ref. 866, which replaced the ref. 666. This new model had a slightly bigger 37mm case with increased water resistance to 120 meters. It featured new hands and came with new indices as well. Once again, IWC offered the stainless steel model on a leather strap or a stainless steel bracelet. And if you ask me, you should always try and get these vintage wholesale replica IWC Ingenieur watches on the bracelet because they look stunning. The gold model came on a leather strap only. IWC offered the ref. 866 with a wider variety of dial colors. The silver and black dial remained on offer, and IWC added a blue and gilt dial. In another slight change compared to their predecessors, all of the new models featured sunray dials for some extra style. Once again, there are variations with different indices as well.

A notable difference was the script IWC logo of the first models versus the later applied IWC lettering combined with the script logo. I love seeing the latter versions for their great style. Besides a different case, the biggest change was a new movement. IWC equipped the ref. 866A with its caliber 854 from 1967 until 1970. From 1970 until 1976, the brand used the slightly improved caliber 854B. The ref. 866AD came with the caliber 8541 at first and the updated caliber 8541B later. What remained, however, was that recognizable design. The Ingenieur ref. 866 is a favorite among collectors because it is the most evolved version of the first Ingenieur. It is also the inspiration for IWC’s previous-generation Ingenieur, which was discontinued following the introduction of the new Genta-inspired version. The ref. 866 is a great classic that goes for roughly €6.5K to €14K.

IWC Ingenieur SL “Jumbo” ref. 1832 Replica Watches

Our third spot is reserved for the famous China super clone IWC Ingenieur SL “Jumbo ref. 1832 watches. This Genta-designed icon marked a big change in the history of the Ingenieur. Gérald Genta abandoned the classic looks of the models that came before and introduced a completely new sporty look. As we all know, alongside the Royal Oak and the Nautilus, it is part of his famous trilogy of modern sports watches with integrated bracelets. I have explained before that what I adore about Genta’s trilogy is the exploration of shapes, from octagonal with the Royal Oak to square with the Nautilus and round with the Ingenieur. Because of its most traditional shape, the Ingenieur is also the least exciting of the three. But in 1976, this silhouette was still very new and exceptional.

Genta kept the important details in mind when designing the new Ingenieur. So the lightning bolt logo is still there, and he also had to design a case with antimagnetic properties. Thus, he wasn’t able to design a slim profile. But as it was an engineer’s watch, he had to work with the story that was already in place, and he did so to tremendous effect. The new Ingenieur featured a 40mm stainless steel case that was just over 12mm thick with an integrated bracelet. For the dial, Genta came up with a graph-paper-like texture that referenced the engineer’s character of the best quality IWC replica watches playfully and subtly. The IWC logo sat at 12 o’clock and served as a proud hour marker. This is something we saw Genta do with the Royal Oak as well.

The magic is in the sum of its parts

IWC equipped the watch with the antimagnetic self-winding caliber 8541ES. It featured a Pellaton winding mechanism and came with a date indicator at 3 o’clock. The movement was placed inside a Faraday cage to protect it from magnetic forces up to roughly 1,000 gauss. The caliber operated at 19,800vph and had a 40-hour power reserve and an antimagnetic escapement. For most of us, including me, this is the quintessential Ingenieur. It was the perfect next step in the evolution of luxury fake IWC’s engineer watches. I wrote about the watch last year, asking for a return of this classic. In the article, I also explained my personal connection to the watch. It makes this watch a very special watch for me. Expect to see prices between €25K and €40K for this classic.

IWC Ingenieur ref. 3227 Fake Watches

Genta’s Ingenieur and the iterations that followed it were far from great commercial successes. The quick rise in popularity of quartz IWC replica watches shop turned out to be a big issue for IWC in selling the Ingenieur. While smaller 32mm and 34mm versions of the Ingenieur stayed in production until roughly 2000, the bigger Ingenieur models were phased out in the early 1980s. It took until 2005 for IWC to introduce a new Ingenieur to continue the legacy of the famous ref. 1832. That’s when the brand introduced the ref. 3227, much to the delight of the Ingenieur fans. The watch introduced a bigger 42mm case that was also rather chunky at 14.5mm thick. And on the stainless steel bracelet, it was a heavy watch too. But it was a well-designed new Ingenieur that respected the past gracefully.

The dial featured a texture inspired by the classic graph paper structure. The dial still looks amazing today and has a tremendous depth to it. Additionally, IWC brought back the 12 and 6 numerals of the original ref. 666. And, of course, the lower half of the dial featured the Ingenieur logo. Inside the chunky case, IWC equipped the watch with the in-house caliber 80110. This automatic movement operates at 28,800vph and has a 44-hour power reserve. When it comes to dial colors, the watch came standard with a black dial with white printing.

Different dial colors for the limited editions

But IWC also created a small number of spectacular limited editions. The ref. IW322705 is a limited edition for the IWC Collectors’ Forum with a special anthracite dial and engraved back. And for the Japanese market, IWC created 200 pieces with a salmon dial that also looks stunning. These two versions easily fetch €10K nowadays. The regular black-dial version goes for roughly between €4.5K and €7.5K. For that money, you will get the Ingenieur that continued the legacy of Genta’s version in a modern way.

Despite its bigger size and chunky case, this is still a great piece that was important in keeping the Ingenieur name alive for the four years it was in production. IWC did create the smaller 40mm ref. 3228 in 2008 that came with the in-house caliber 80111. That version was produced in a limited run of 600 pieces with a white dial and rose gold details. While I am not the biggest fan of the color combination of the dial and the hands and indices, it is a perfect size and thinner at 13.5mm. This is what the 2023 fake IWC Ingenieur watches could have been and maybe should have been when it was revived in 2005.

Replica IWC Ingenieur SL “Jumbo” Quartz ref. 3303 Watches

We could have gone for multiple 1:1 IWC replica watches for our final pick. But the one special piece that I think is highly underrated is the IWC Ingenieur SL “Jumbo” Quartz ref. 3303. Together with the mechanical ref. 1832 SL “Jumbo,” IWC also released a quartz version of the Ingenieur with ref. 3003 in 1976. Other than the movement, it was the same watch because the case design allowed for either a mechanical or a quartz movement. Some Ingenieur owners swapped their mechanical movement for a quartz version, which was impossible with the second-generation quartz Ingenieur ref. 3303. IWC decided to update the movement to the much slimmer IWC quartz caliber 2250, which was, essentially, a renamed ETA 955.112.

As a result, IWC had to update the case and dial design, and the brand did that perfectly. The overall balance in the design of the dial and the bezel was optimized. Additionally, IWC redesigned the bracelet to look slightly more refined. Essentially, it is a slimmer and better version of Genta’s design. Between 1980 and 1985, IWC produced only 369 pieces of the IWC Ingenieur SL Quartz. Of those 369 pieces, 149 were produced in steel. An additional 160 were produced in steel and gold, with another 56 in full yellow gold and four in yellow gold with diamonds. So it’s a rare piece that you don’t see a lot. But the steel version goes for a lot less than the original ref. 1832. It makes sense as it is quartz and not an original Genta design. Nevertheless, it is a thing of great beauty that goes for roughly between €10K and €17K.

Honorable mentions

When it comes to the Ingenieur, some so many more models are worth checking out. The first is the ref. 3239 from 2013. It was the successor to the ref. 3227 that I talked about earlier. It came with a 40mm case that was only 10mm thick, making it a great follow-up to the previous version that had better proportions. But when it came to the dial, IWC steered away from a graph-paper-inspired pattern and presented the ref. 3239 with a much simpler dial that does not have the same impact. On top of that, the brand resorted to a reworked ETA 2892-A2 to make sure it fit the case. This doesn’t make it a bad watch, but it’s not as impactful as the other models on this list.

The last honorable mention goes to the Ingenieur Officially Certified Chronometer ref. 3521. This model was produced between 1993 and 2000 and was a follow-up to the series of smaller Ingenieurs from the 1980s with slimmer cases that collectors also call the “Skinny Ingenieurs.” The first “Skinny Ingenieur” was the ref. 3305 that featured a smaller 34mm case than the ref. 3303, which I just talked about. This ref. 3521 from the 1990s also featured a 34mm case that was only 8.8mm thick. So if you can pull off a smaller watch, this might be a very good option, especially knowing that IWC turned to Jaeger-LeCoultre for the caliber 887/2. It is based on the JLC 889/2 but gilt with blued screws, and it came equipped with a platinum rotor weight. It truly is a stunner that can be yours for between €5K and €10K.

Final thoughts

There you have it — seven great IWC Ingenieur fake watches site that are part of the bigger Ingenieur family. Writing this article made me realize once again that there is so much more to the Ingenieur history than we tend to think, and a new chapter has now been added with the latest Ingenieur. But we realize that you might not agree with all the picks for this list. That’s why we would love this to be the start of a bigger discussion.

The AAA Wholesale IWC Ingenieur Automatic 40 Fake Watches UK In Titanium

One of our main talking points this year for Watches & Wonders is the observation that many brands have pared back the number of releases, instead opting to concentrate on one or two SKUs. We saw this with Lange and the new Odysseus Chronograph, and we saw it – almost to an extreme – with IWC and the rebirth of the perfect replica IWC Ingenieur watches.

On Monday we wrote up a story on the new steel Ingenieur models – directly inspired by a specific vintage reference (the SL) conceived by Gérald Genta (father of the Royal Oak and Aquanaut).

While a reissue in theory, what I think these UK top fake IWC watches represent is a thoughtful way to integrate heritage into a wholly modern package. Vacheron’s yellow gold 222 from last year’s fair was a textbook reissue. The new Ingenieur is a heritage-infused reawakening.

The steel models feature pattern dials in white, black, or green blue. Holding those high quality IWC replica watches in the hand brings shades of the Aquanaut and certainly fits the modern trend of re-exploring the integrated bracelet sports watch. But it isn’t as though the Ingenieur has been missing from the IWC catalog for years.In fact, it’s been something of a neglected child before today– but one that previously packed tremendous value and was one of the least expensive IWCs available. That’s over now.

With this year’s release, IWC has put all of its W&W energy into the Ingenieur and positioned it in a new way. That means a price in excess of $11,000 ($11,700) in steel. And on top of all that, IWC didn’t just release a trio of steel IWC Ingenieur copy watches for sale – but also one in titanium, and boy is it cool.

It was a release that went under the radar and it wasn’t until our meeting with IWC at the show that we even knew that it existed. Stand-out features of this luxury IWC replica watches that separate it from its steel counterparts are its pseudo all-grey-everything aesthetic with a grey dial and dark grey-hued titanium case and H-link bracelet.

But it’s not just a titanium case and bracelet. It’s sandblasted, providing some nice texture. What this does, at least in my mind, is separate this model from the whole integrated steel sports watch “thing” because it’s not steel. In fact, it’s 45% lighter than steel. The titanium, especially with the treatment of the metal, gives this best super clone watches a distinct look – one far removed from the Jumbo SL days of the 1970s. It takes the Ingenieur and brings it firmly into the modern context. It contains all the new design codes present in the steel models including redesigned crown guards and the screws on the bezel which harken back to Genta’s design for the SL.

At 40mm, this is no small Swiss movements replica IWC watches but the size makes sense considering where tastes are these days. It’s also thin at 10.7mm and features both a closed caseback (housing the caliber 32111 with 120 hours of power reserve) and 100m of water resistance.

Of course, you don’t get titanium without a price premium. And here that makes this a $14,600 proposition, firmly placing the Ingenieur in a very different category of sport fake watches online altogether – one that includes models like Chopard’s Alpine Eagle.

Does that make the price too punchy? That answer lies in the mind of the individual buyer. What I do think is that this is a strategic move by the brand to reposition the model range, and no matter what the price is, I think this titanium iteration of the cheap IWC replica watches is the standout.

Between the ’70s Genta-centric heritage of the Ingenieur (and the design codes that come with it), and the classic Ingenieur logo on the dial, this fake watches shop feels steeped in its own history. And yet, with the checkerboard dial, modern IWC logo, and 40mm sizing, nobody is going to confuse it with a vintage watch.

What happens next with the model range is anyone’s guess, but IWC has made a statement with the Ingenieur (especially in titanium) that opens a new chapter for the model going forward.

Neo-Vintage 1:1 Top Replica IWC Watches UK From The Last 30 Years

It was the era of Nirvana, Pierce Brosnan’s James Bond, and the iPod. The 1990s and early 2000s were also, in some ways, an interesting era for watch design. And because of this, these two decades are also ripe for the picking when it comes to neo-vintage AAA IWC replica watches that fly a little under the radar and yet offer exciting value propositions.

Replica IWC Mark XV ref. IW325301 Watches

The UK cheap fake IWC Mark XV watches, some would argue, is the last of the “true” Marks coming from International Watch Company Schaffhausen. Why is that, you ask? Because it shares the inherent design language of the original Mk 11. The baton hands, crisp font, and perfect 38mm case size make this an excellent GADA watch, just like the Seamaster above. In fact, I prefer the Swiss made replica IWC Mark XV watches to the new Mark XX!

With a robust ETA 2892-A2 movement featuring many upgraded components, this is a pilot’s watch with the pedigree of IWC, a perfect mid-sized case and proportions, and the best dial layout, I’d argue, of any of the Marks except, perhaps, the Mk 11.

The high quality copy IWC Mark XII watches (1994–1998) definitely has a strong fanbase, and people appreciate that it had a movement supplied by Jaeger-LeCoultre. I’ve handled Mark XVs, though, and there is something about the 38mm case that creates a more balanced dial than the 36mm case of the Mark XII. The Mark XV, while still relatively easy to find, is becoming rarer. It was produced from 1999 to 2005, with the IWC Mark XVI taking its place in 2006.

Fake IWC Pilot’s Chronograph ref. IW3706 Watches

Best IWC replica watches in the 1990s and early 2000s was on something of a roll, so another watch from the brand had to make this list. Like the Mark XV above, this reference provides a nice case size (39mm), baton hands, and crisp numerals. Then, of course, there’s the automatic chronograph movement, which brings greater functionality without impeding legibility.

This reference is readily available for reasonable prices (€3K–5K), and when you compare it to its more modern counterparts, I would argue that this older ’90s model has a lot to offer in terms of unique perfect IWC super clone watches design elements. For the price you pay, you get a watch with incredible quality, heritage, and looks. This model seems to be going up, so there’s no doubt that some people are catching on!